Product Description

1.Ultrasonics Testing Equipment 2 Portable ultrasonics 3.Protection accorind to IP*6 4.Fast and bright LCD 5.Temperate Ultrasonics Testing Equipment Specifications Calibration ranges Min.: 0 to 0.5 mm **0 % (steel), 0 to 0.*2� **0 % (steel) Max.: 0 to 9,**9 mm **0 % (steel), 0 to **0� **0 % (steel) within the frequency range from 0.2 to 1 MHz / 0.5 to 4 MHz 0 to 1,**0 mm **0% (steel), 0 to *6� **0 % (steel) withinthe frequency range from 0.8to 8 MHz / 2 to *0 MHz Sound velocity 1,**0 to *5,**0 m/s, *0 to **0 inch/ms variable in steps of 1 m/s, 0.1 inch/msand fixed programmed values Display delay From **0 to 1,**0 mm, *0.3 to *0� (**0 ?s) Probe delay 0 to **0 ?s Auto calibration Measurement and setting of sound velocity and probe delay using two known calibration echoes (*-point calibration) Pulse intensity **0 pF, 1 nF Damping *0 ohms, **0 ohms (1,**0 ohms in TR mode) Pulse repetition frequency 4 to 1,**0 Hz, variable in *0 steps Frequency ranges (*3 dB) 0.2 to 1 MHz / 0.5 to 4 MHz / 0.8 to 8 MHz / 2 to *0 MHz Gain 0 to **0 dB, variable in steps Gain steps 0.5 / 1 / 2 / 6 / *2 dB (or user-adjustable), step 0 is locked Fine gain 4 dB, continuously variable in *0 steps Rectification Full-wave, negative and positive half-wave, RF mode Reject Linear, 0 to *0 % screen height Variable in steps of 1 % Monitor gates 2 independent gates in color bar mode, start and width variable over the entire calibration range, response threshold of *0 to *0 % screen height variable in steps of 1 % (coincidence and anti-coincidence), alarm signal via LED and connectable internal horn, Gate A switchable as interface gate for Gate B, gate magnifier (zooming of gate range over the entire display range) Sound path measurement Digital display of sound path (projection distance, depth) between initial pulse and the first echo in the gate, or between the echoes in the two gates, measurement always at the intersection point with the echo flank or echo peak Measurement resolution 0.*1 mm within a range up to *9.*9 mm/ 0.1 mm within a range from **0 to **9.9 mm/ 1 mm above 1,**0 mm, 0.**1� within a range up to 9.**9�/ 0.*1� above *0� With evaluation in the frozen A-scan: 0.5 % of the calibration range setting Amplitude display In % screen height USM *5X DAC: additionally in dB above DAC or TCG USM *5X S: additionally in dB above DGS curve or ERS Displayed reading Sound path, (reduced) projection distance, depth, amplitude for every gate, userconfigurable at four positions of measurement line and of the zoomed display in the A-scan A-scan functions Manual or automatic A-scan freeze, A-scan comparison, echo dynamics(envelope), peak echo storage Color functions Patented color-coded display of legs in angle testing, adaptation of background color to the light conditions of test environment, color display of monitor gates and of registration curves (DAC, TCG, DGS) for direct recognition, messages and alarms in red characters DAC / TCG (Option) Only USM *5X DAC and USM *5X S: Distance-Amplitude Curves (DAC) or TCG line (TCG) with a maximum of *0 reference echoes, 4 other curves or lines can be displayed with variable dB intervals. JIS DAC can be selected in order to allow inspection acording to JIS Z********2(Japanese Inspection Standard). Automatic gain control during DAC recording. DGS (Option) Only USM *5X S: DGS curves for single-element and dual-element probes (B1S, B2S, B4S, MB2S, MB4S, MB5S, WB�*1, WB�*2, SWB�*2, SWB�*5, MWB�*2, MWB�*4, SEB and MSEB) and for all materials, sound attenuation and transfer loss correction, 4 other curves can be displayed with variable dB intervals Display size / resolution **6 mm x *7 mm, 4.6" x 3.4" (W x H) **0 x **0 pixels A-scan size / resolution **6 mm x *0 mm, 4.6� x 3.2� **0 x **0 pixels (zoom) Data memory **0 instrument setups or reports, including AScans can be stored, recalled, printed or exported to a computer. RS **2 interface *-pin DSUB, bi-directional, **0 - *7,**0 baud An USB adapator cable can be provided to connect the USM *5X to a computer that does not have RS **2 port Input/Output *-way Lemo*1 socket (trigger output, gate alarm, test data release) Additional analog output for amplitude or sound path in selected gate VGA output **-way Lemo*1 socket for the connection of an external display screen or beamer Dialog languages German, English, French, Italian, Portuguese, Spanish, Danish, Swedish, Norwegian, Finnish, Czech, Slovenian, Romanian, Dutch, Croatian, Hungarian, Russian, Polish, Slovakian, Japanese Weight 2.2 kg, 4.9 lbs., including batteries Size **7 mm x **5 mm x **0 mm, 7.0" x *0" x 3.9" (H x W x D)